Monitoring FiO2 on mechanically ventilated patients

If using a ventilator that does not offer continuous monitoring of oxygen, Spacelabs 92518 Multigas Module can be employed with Xprezzon or Qube monitors to provide continuous FiO2 monitoring. The following configuration is recommended.

  • Qube monitors will require a 90499 two-slot module housing to utilize both the multigas and multiparameter modules.
  • If monitoring FiO2 only, sampling should be from the inspiratory port of the ventilator.
  • If capnography is needed as well, sample from the backside sampling port of the highest efficiency filter (HEPA or 99.9999%) available.

Additional information, including features and specifications, is available in the following data sheets.